Alan Cummings
to me, ace, nand.lal 

Hi Bryant:

Sheet one contains a summary of data
on the warrant sheets that came with the
TET detectors.

The right most columns contain physical measurement
data related to the specification I sent
earlier. The numbers near 0.133" are the thicknesses
of the periphery. The 1.885" number
is the diameter, and the 0.010" is the setback
in the back of the detector (not the 0.005" that
the spec said). The active thickness of the detectors
is then ~0.123" less any deadlayer, which is of order
100-200 um.

The 2nd and third pages show
which detectors are in which positions in
FU1 (V1) and FU2 (V2).

Best,
Alan

#########################################################
#       Alan C. Cummings                                #
#       Caltech                                         #
#       Mail Code 290-17                                #
#       Pasadena CA 91125                               #
#       Tel: 626-395-6708                               #
#       Fax: 626-449-8676                               #
#       email: ace@srl.caltech.edu                      #
#       http://www.srl.caltech.edu/personnel/ace.html   #
#########################################################